Gap analysis in axial piston pumps
So far, gap measurements inside the pumps were not possible because of the extreme requirements. The sensors must be resistant to high speeds, high pressures up to 1,000 bar and temperatures above 100 °C. Furthermore, the pumps are extremely compact, which significantly limits the space available for integration of sensors. Thanks to the extremely small sensor designs and their high pressure and temperature stability, the eddyNCDT inductive miniature sensors are ideal for this application. The eddyNCDT 3300 eddy current measuring system, which is one of the most powerful systems in the world, is therefore used on the test rig for evaluating the pumps.
Recommended sensor technologyeddyNCDT 3300
Запрос ссылки для скачиванияApplication "Gap analysis in axial piston pumps" (PDF, 115 KB)
Measuring thermal length expansion of spindles
The SGS 4701 displacement measuring system (Spindle Growth System) is developed specifically for high speed milling machine applications. Due to high machining speeds and the heat generated, the linear thermal expansion of the spindle in the precision machine tool must to be compensated for in order to keep the tool in a defined position at all times. The SGS sensor measures the thermal and centrifugal force expansion of the spindle. These measurement values are fed into the CNC machine tool as correction values, compensating for any positioning errors. The SGS 4701 operates on the eddy current measuring principle. This non-contact measurement method is wear-free. Furthermore, the measurement procedure is resistant to disturbances such as heat, dust and oil.
Nanometer positioning in lithography machines
To illuminate individual components on the wafer, the lithographic devices move the wafer to the respective position. Capacitive displacement sensors measure the position of the travel path in order to enable nanometer-accurate positioning.
Recommended sensor technologyЕмкостные датчики перемещения
Position measurement of the tailstock
The tailstock is an important part of a lathe or milling machine. The tailstock is used to support long workpieces by means of a center, which catches in the center hole on the front side of the workpiece. In order to detect the center tip, compact draw-wire sensors from Micro-Epsilon are used. The measuring wire is connected to the center tip and measures the displacement of the tailstock.
Recommended sensor technologyДатчики пути канатной тяги на базе потенциометра или кодирующего устройства
Monitoring the clamping position of tools
Often, initiators and switching rings, which provide a switching signal, are used to monitor the clamping position in high-performance tool machines. However, these require complex adjustment and set up. Analog sensors from the Micro-Epsilon LVP series offer significant improvements. The cylindrical sensor is integrated into the release device and directly measures the clamping stroke of the drawbar. On the drawbar, a ring is fastened, which acts as the target for the sensor. The LVP sensor can be universally used with the most varied types of tool due to an extremely compact sensor design. The sensor supplies an analog signal according to the stroke motion of the drawbar when clamping the tool. Consequently, continuous monitoring is possible without the switching point having to be laboriously set mechanically. The miniaturized sensor electronic unit can either be accommodated at the point of measurement or in the control cabinet. Thanks to its high accuracy, the LVP sensor contributes significantly to meeting the ever increasing demands on machine tool precision and availability.
Recommended sensor technologyInductive sensors for specific applications
Measuring tool holders in the magazine
Modern machine tools have complex magazines with various tools that are automatically picked up by the machine. In order for these tools to be accurately picked up, the tool holders must be precisely positioned. To check the position of the tool holders, optoNCDT 1420 laser sensors are used, which measure the metallic holders from above and from the side. These smart laser sensors stand out due to their high measuring rates while providing precise measurement values, despite strongly reflecting, metallic surfaces.
Compensating for axial extension of milling spindles
Due to high machining speeds and the heat generated, the linear thermal expansion in milling spindles needs to be compensated for in order to keep the tool in a defined position at all times. The SGS sensor developed by Micro-Epsilon measures the thermal and centrifugal force expansion of the spindle. As well as measuring linear thermal expansion, the temperature of the sensor is also detected and output.
Foreign body detection in medical technology
In this application, the MDS sensor recognizes foreign bodies in blister machines during the tablet packaging process. Via the movement of overhead touching rollers, foreign bodies between the blister packaging and covering material can be detected. Exceeding a pre-defined point triggers an alarm.
Valve lift measurement in the food industry
During the filling of drinks cartons, the exact dosage is a critical factor. The sensor measures the valve lift of the filling line and requests several switching points in a measuring range of 35mm. The sealed stainless steel housings of the MDS-45-Mxx series are ideal for the food industry.
Monitoring embossment depth
Embossed serial numbers enable worldwide unambiguous identification of, for example, car body shells. For increased safety measures (e.g. in case of theft), car body IDs are punched into the vehicle frame. Therefore, the depth of the embossment is a critical factor.
This is why embossing machines operate using optoNCDT 1420 laser triangulation sensors from Micro-Epsilon. These determine the precise distance between the embossing tool and the component. Based on these distance values, the tool can be positioned correctly. After the embossment is finished, the sensor measures the profile of the embossment and ensures that all characters are embossed to the required depth.
Запрос ссылки для скачиванияApplication "Monitoring embossment depth" (PDF, 83 KB)
Monitoring oil gaps in hydrostatic bearings
Hydrostatic bearings are used in large plant and machinery such as stone mills, telescopic installations etc. Monitoring the gap size is a critical factor, as any disturbances in the hydraulics can cause pressure drops, which in extreme cases, can cause the gap to close, resulting in damage to the bearings and ultimately system failure. Here, it is important to have a system that is easy to install as also ageing plants have to be retrofitted. Due to the long service life and the worldwide use of this plant, the sensor should be easy to replace. For this reason, non-contact eddy current displacement sensors of the eddyNCDT 3001 series are used.
Запрос ссылки для скачиванияApplication "Monitoring oil gaps in hydrostatic bearings" (PDF, 96 KB)
Web-edge detection in the calender of a paper machine
If movement of the paper web in the calender is not exactly executed in one line, the heated calender roller is pressed directly onto the coating of the opposite roller, which can damage it. Repairing this special coating or even replacing the whole roller would be very costly, which is why it is mandatory to control the position of the web edge. This is where laser line sensors from Micro-Epsilon are utilised, transferring the exact position of the web edge directly to the machine control system.
Recommended sensor technologyLaser scanners for 2D/3D profile measurements
Запрос ссылки для скачиванияApplication "Web-edge detection in the calender of a paper machine" (PDF, 142 KB)
Temperature measurement for injection mould applications
Users of injection mould machines for plastics processing are facing increased quality requirements imposed by end-users, in particular for automotive applications. Because of this trend, the importance of online temperature control right after extrusion as a global quality attribute is growing.
Recommended sensor technologyThermal imager
Запрос ссылки для скачиванияApplication "TIM 160 for injection moulding applications" (PDF, 172 KB)
Active compensation for movements in the measurement process
Harsh industrial environments place high demands on optical displacement sensors – precise measurements must still take place despite dust and high processing speeds. The optoNCDT 1750 and optoNCDT 2300 series of laser sensors have been mastering these challenges for many years. However, if motion disturbances (e.g. belt movements, radial movements of pulleys, and base body vibrations) occur that are greater than the object being measured, the measurement process may be impeded or made impossible. Examples include folds in a belt.
Recommended sensor technologyUniversal laser sensor for industry & automation Highly dynamic laser sensor with 50kHz
Запрос ссылки для скачиванияApplication "Active compensation for movements in the measurement process" (PDF, 168 KB)
Fluid level measurement of aluminium pig irons
In aluminium casting plants or foundries, the cast is poured into shape to form small bars, known as pig irons. The charging level in the forming process is critical in ensuring consistent weight of the pigs. Using a special non-contact measuring device, the depth of fill is recorded. For these applications, an Austrian system builder uses laser scanners.
Recommended sensor technologyLaser scanners for 2D/3D profile measurements
Запрос ссылки для скачиванияApplication "Fluid level measurement of aluminium liquid" (PDF, 109 KB)
Measurement of the radial deviation of a cutter disk
During the manufacture of veneer strips from laminated wood, the precision of the cutting disk determines the quality of the final product. High demands are made on the veneer strips in terms of dimensional conformance. The thickness of the strips must be less than 1mm and may only exhibit tolerances in the micrometer range.
To maintain the quality criteria the radial deviation of the cutting disk is measured and monitored during the production process with a non-contact laser triangulation sensor from the Series optoNCDT 2300. This means that high demands are made on the measurement system: Dust, chippings and a shiny target surface must not affect the measurement accuracy.
Recommended sensor technologyoptoNCDT Laser Sensoren
Запрос ссылки для скачиванияApplication "Measurement of the radial deviation of a cutter disk" (PDF, 82 KB)
Position checking on robots
The introduction of the international standard ISO 9283 demands new non-contacting measurement methods. The measurement system for the position measurement is composed of a measurement cube with a defined weight, a sensor and a support. The sensor is equipped with six U15 eddy current sensors. During the measurement the robot moves the measurement cube into the sensor range. The data from the eddy current sensors is passed via a fast interface to the PC where it is processed. Measurement inaccuracies due to linearity and tilting errors (parallelism between the sensor and measurement object) and thermal effects are additionally compensated in the measurement software.
Запрос ссылки для скачиванияApplication "Position checking on robots" (PDF, 118 KB)
Exact crusher gap adjustment in rotary crushers
Rotary crushers for quarries or ore mines can grind up to 3500 t of material to the desired grain size in one hour. For this purpose an eccentric bearing bush generates a rotary-oscillating movement of the crusher axle, thereby constantly changing the gap between the crusher jaws and the crushing cone. For grinding the set gap continuously moves along the inside perimeter of the crushing room. With a longdistance sensor in the hydraulic cylinder the crushing gap can be exactly adjusted by raising and lowering the axle.
Запрос ссылки для скачиванияApplication "Exact crusher gap adjustment in rotary crushers" (PDF, 293 KB)
Non-contact thickness measurement of aluminium
For the prompt detection of incorrect thickness on aluminum strip, patented laser triangulation sensors are employed as a modern alternative solution to isotope measurement systems. To save costs the places on the strip which are outside the permissible thickness tolerance are not provided with a foodstuffs-compatible coating and so the strip can be recycled without problem in production. At the point of measurement the sensors are mounted opposite one another, above and below the passing aluminum strip. Irrespective of the exact height position of the strip, the exact material thickness is obtained by a simple distance signal coupling, F=Ref. - (A + B), of both sensors.
Recommended sensor technologyoptoNCDT Laser Sensoren Measuring and inspection systems for the metal processing industry
Запрос ссылки для скачиванияApplication "Non-contact thickness measurement of aluminium" (PDF, 138 KB)
Flatness measurement in rolling mills
The requirements on the surface quality of rolled sheet metal are continually increasing. This may be steel sheet which is used, for example, for stainless steel fronts in kitchens, or also aluminum sheet used in the automotive field. The surface must be flawless to offer the customer a high quality visual appearance. Consequently, measurement equipment is employed in rolling mills to acquire the so-called flatness of the rolled sheet metal. Flatness is taken to mean the surface evenness of the sheet in the unstressed state.
Запрос ссылки для скачиванияApplication "Flatness measurement in rolling mills" (PDF, 191 KB)
A consistent yarn thickness is a prerequisite in the textile industry for high quality products. Therefore, the naturally occurring yarn thickness fluctuations must be eliminated. The yarn is drawn to a constant thickness using a stretching tool. The measured data for controlling the stretching tool are provided by an eddy current sensor which indirectly measures the thickness. The thickness is transmitted to the eddy current sensor using sensing rollers. After the stretching, the result of the processing operation is also checked by an eddy current sensor.